Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: jimmy_bored on July 26, 2006, 02:21:36 pm

Title: Bally Midway Coin Door
Post by: jimmy_bored on July 26, 2006, 02:21:36 pm

I have two quick questions reguarding the Bally Midway coin door from a Tron cabinet.

1)  The coin door takes 12V right? (Like for the lights)

2) The mechs are missing.  Is it possible to get the mechs for this coin door?

I have attached two pics for reference.

Thanks,

Jimmy

Title: Re: Bally Midway Coin Door
Post by: Ken Layton on July 26, 2006, 05:53:20 pm

If the door came from a Tron, then the lights in it are 12 volt (#194 lamps available at any auto parts store).

Most conventional coin mechs will fit this door, but not any Coin Controls brand.

These doors were originally equipped with Coin Mech brand coin chutes.

Title: Re: Bally Midway Coin Door
Post by: jimmy_bored on July 27, 2006, 09:43:08 am

Quote from: Ken Layton on July 26, 2006, 05:53:20 pm

If the door came from a Tron, then the lights in it are 12 volt (#194 lamps available at any auto parts store).

Most conventional coin mechs will fit this door, but not any Coin Controls brand.

These doors were originally equipped with Coin Mech brand coin chutes.

Thanks Ken!