Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: divemaster127 on July 15, 2006, 03:34:03 pm

Title: Does anyone want to split a order of pinball playfield glass from happ $36.20
Post by: divemaster127 on July 15, 2006, 03:34:03 pm

Does anyone want to split a order of pinball playfield glass from happ $36.20 is my cost each, I have too order 2 pcs, I will sell to you at my cost plus shipping to you. Let me know if anyone is interested
thanks
dm

Title: Re: Does anyone want to split a order of pinball playfield glass from happ $36.20
Post by: TheOtherBob on July 15, 2006, 06:17:07 pm

You might be able to get it cheaper locally at a glass shop.  Call around.

Dimensions should be: 21"x43" (3/16" thick)

Make sure it is TEMPERED!

You don't need to pay for smoothing the edges.

You don't need the TEMPERED logo either but it might cost a bit more to have it made without the logo.

Title: Re: Does anyone want to split a order of pinball playfield glass from happ $36.20
Post by: TheOtherBob on July 15, 2006, 06:20:06 pm

Just to make sure.... it's for your T2 right?  Then those dimensions are good.  If it is a wide body pin the width should be 23 3/4".

Title: Re: Does anyone want to split a order of pinball playfield glass from happ $36.20
Post by: divemaster127 on July 16, 2006, 04:36:38 pm

yah, i have a t-2 i will check local, do you have the dimensions for the back glass also, now im worked im gonna start looking for another pin, maybe junkyard or magic
dm

Title: Re: Does anyone want to split a order of pinball playfield glass from happ $36.20
Post by: TheOtherBob on July 17, 2006, 10:11:41 am

Not sure on the backglass.  You might have to search rec.games.pinball or pull out your backglass and measure it up.

Good luck!