Build Your Own Arcade Controls Forum
Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: arcadefever on July 13, 2006, 01:38:06 pm
-
i found something really great to clean CPO and side arts,
a magic sponge :D , i also clean my candy cab "astro city" and the results are stuning 8)
just moist the sponge, clean the cpo and dry it with a towel ...
(http://img20.imageshack.us/img20/1301/kif16003nt.jpg)
the result:
(http://img165.imageshack.us/img165/2206/kif15969fb.jpg)
(http://img142.imageshack.us/img142/6908/kif15954yh.jpg)
(http://img283.imageshack.us/img283/4104/kif15984my.jpg)
they look alsmost brand new 8)
-
Yep ... love the magic sponges. :cheers:
Be warned, though these are abrasives and I wouldn't use them on a glossy-surface.
Lots of info in rec.games.pinball on them -- worked wonders on the horribly-dirty playfield of my Flight 2000.
Cheers.
-
agreed. Magic Erasers are awesome.
-
Be warned, though these are abrasives and I wouldn't use them on a glossy-surface.
Agreed. These are abrasive and will scratch perspex. Using one to clean some marks off the walls of my home left dull and lightly scratched patches.
-
Also not recommended on DARK surfaces. Leaves a dull whitish film behind.
-
Also not recommended on DARK surfaces. Leaves a dull whitish film behind.
It did the same on my sideart, but ran over it with a damp rag, then "buffed" it with a dry rag - perfect!
Also, completely removed marker tracing on my bezel stickers!
-
I use it to remove sticker residue on sideart. It also made my Lethal Enforcers CPO look new again.
LOVE IT.