Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Marky_1979 on July 06, 2006, 09:01:31 am
-
Iv been trying for months to get a 28" bezel to makle my arcade look professional and more to the point hide the fact that im using a tv in the cab. I can only find 19" and 27" but no 28" can anyone help me with a web site to get one :)
-
Try this out:
BYO Bezel (http://forum.arcadecontrols.com/index.php?topic=17175.msg136366#msg136366)
or this:
Bones' Bezel (http://forum.arcadecontrols.com/index.php?topic=35285.msg444631#msg444631)
*edit* Looks like you posted in Tailgunner's thread. Oh well, just trying to help. I haven't seen a commercial version for 28"+ monitors...
-
I've only ever seen 13", 19", 25" and 27" bezels myself. There's probably one for the bigger 33" arcade monitors as well.
You could try to buy a 27" and cut out the inner area to accomodate the extra size, but you might be better off trying to make your own as mentioned. I'm going to try to make my own for a 17" PC monitor I'm using for a project.
-
What's the viewable area on your monitor? In my case, the monitor was spec'd as a 29" but the viewable area is actually about 27" so I was able to use the 27" monitor bezel with no problems.
Steve
-
Not sure if iv measured it correctly but i think you could be right its a 28" tv but from top left visible area to bottom right is 26"
-
Not sure if iv measured it correctly but i think you could be right its a 28" tv but from top left visible area to bottom right is 26"
you should be able to get a 27" bezel to work.