Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: eastbayarb on July 02, 2006, 10:19:57 pm

Title: WANTED: someone to mod my sega saturn SCART cable to VGA/RGB cable
Post by: eastbayarb on July 02, 2006, 10:19:57 pm

I just don't have the time to do this. I have a sega saturn scart cable and I need it modified to connect to a VGA port on my monitor (yes, my monitor supports both 15khz and 31.5khz).

I'd do it myself but I work and going to school

thank you!

P.S. I am in the San Francisco Bay area but can ship it!

Title: Re: WANTED: someone to mod my sega saturn SCART cable to VGA/RGB cable
Post by: eastbayarb on August 26, 2006, 02:33:11 am

anyone?

Title: Re: WANTED: someone to mod my sega saturn SCART cable to VGA/RGB cable
Post by: gir26 on August 26, 2006, 11:24:59 am

Find a guide and Ill do it for ya!

Title: Re: WANTED: someone to mod my sega saturn SCART cable to VGA/RGB cable
Post by: gir26 on August 26, 2006, 11:53:19 am

Ok, found a guide, but not to convert to vga.
The guide I found was part of a Saturn to Jamma project.
I could build the small circuit easy enough.

What you would be left with is your 3 (rgb) wires and your video sync wire.

Would this format work for you?
I couldnt find any info on a saturn -> vga device/ mod.

Title: Re: WANTED: someone to mod my sega saturn SCART cable to VGA/RGB cable
Post by: Goz on August 26, 2006, 12:23:13 pm

I might be selling my modded Saturn with VGA cable and 4meg cart. I likely wont finalize my decision for a week or so.

Here's a link that shows the pinout for just about everything.

LINK (http://ucon64.sourceforge.net/ucon64misc/conn.html)

You shouldn't have a problem hacking a cable / making it work if you have the pinout from the link above.

I have everything else you'd need to use it in a cab as well (hacked playstation pads and playstation to saturn controller adapter, etc).