Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: markymarky99 on June 29, 2006, 06:11:06 am

Title: Can I use a different chassis for my monitor?
Post by: markymarky99 on June 29, 2006, 06:11:06 am

I have a  VISION PRO monitor which now has a bad chassis.  I have a brand new chassis that was pulled from what I believe was a Pentranic monitor that had a bad tube.  The connections look exactly the same .  It seems as if you could simply plug this PEN chassis right in to the monitor of the VISION PRO.  Would this work?  thanks for your time, mvc

Title: Re: Can I use a different chassis for my monitor?
Post by: grantspain on June 29, 2006, 06:21:54 am

that all depends on whether they are both the same resolution tubes,the same yoke impedence, and tube neck pins are the same-i have looked at your related posts and i believe you have only blown that component on the heat sink,worth changing that first

Title: Re: Can I use a different chassis for my monitor?
Post by: Ken Layton on June 29, 2006, 10:52:32 am

See this site for chassis/tube swaps:

www.8liners.com/datatech/monitor.html