Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: sp0rk on June 27, 2006, 02:59:34 am

Title: WG K7000 problem
Post by: sp0rk on June 27, 2006, 02:59:34 am

Hey I have a WG k7000 series monitor that work well but:

when i first turn the game on, the screen doesn't come up anymore.  If I push down onthe harness that connects to the RGV synch/etc - the screen will come up and it will turn on (only if I hold it in for like 2+ seconds.  If I just push on it it will make the sound, but then shut off again immediately)

Anyone with a frome flow chart or who knows about these know what might be wrong, or where to check?

Thanks!

- Ryan

Title: Re: WG K7000 problem
Post by: SirPeale on June 27, 2006, 07:52:10 am

Check out the solder joints around the harness.  They may be cracked.

Title: Re: WG K7000 problem
Post by: Ken Layton on June 27, 2006, 10:14:00 am

And capkit it.