Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: markymarky99 on June 19, 2006, 01:34:41 am

Title: Multi Williams Jamma board wiring?
Post by: markymarky99 on June 19, 2006, 01:34:41 am

HI, anyone know how to wire the Multi Williams Jamma boards that are out there?  There are so many buttons for Stargate / Defender, how do you know which wire
goes to what button?  Thanks for your time

Title: Re: Multi Williams Jamma board wiring?
Post by: CheffoJeffo on June 19, 2006, 12:42:45 pm

I am going to presume that this is one of the multi-in-one boards, as opposed to one of Clay's MW kits (pretty obvious since you said JAMMA board, but to be clear..).

Further, I'll assume that it is one of the ArcadeShop boards, since I know where to find the pinout for that:

http://www.arcadeshop.com/multi-pcb/multi-pcb.htm

HTH, Cheers.