Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: gtnshape on March 07, 2003, 11:45:34 am

Title: routing control panel
Post by: gtnshape on March 07, 2003, 11:45:34 am

Does anyone know what the proper counter-sink depth is for joysticks on 3/4" plywood?

Title: Re:routing control panel
Post by: Auntie MAME on March 07, 2003, 12:05:38 pm

I routed out the bottom on 3/4 MDF so that the joy stick base was flush with the MDF.  The height of the stick is perfect.

Title: Re:routing control panel
Post by: rhd on March 07, 2003, 12:18:39 pm

I have a 3/4" CP with 1/8" lexan and routed out 1/4" for the joystick. So the CP over the joystick is 1/2" thick.

Title: Re:routing control panel
Post by: gtnshape on March 07, 2003, 12:34:31 pm

Thanks so much 1/4" it is!