Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: bossyman15 on June 05, 2006, 06:51:48 pm

Title: my ipac 4 not responding!
Post by: bossyman15 on June 05, 2006, 06:51:48 pm

i'm sure this question was asked but i searched and no luck. so...

my i pac 4 worked before but when iplug it into my pc today NO RESPONDS!!! i replug it and restart it many times and no luck.

i'm using usb and this is new version of ipac 4 ( no jumper)
oh also i checked winpac and done test still no responds, made sure winpac are set to usb yes it is.

i even tried pluging my keyboard into passthu but that keyboard doesn't respond. i restart my ocmp to be sure but still no.

i even checked to be sure the ground wire are tight in the stocket yes it is.

Title: Re: my ipac 4 not responding!
Post by: hypernova on June 06, 2006, 12:21:00 pm

Check the Ipac self-test LEDs on the board itself.  If it's anything like mine, the P3/4 LED is lighting as normal, but the P1/2 isn't.  If that's the case, there's a wiring problem somewhere on your CP.  I think mine turned out to be somewhere along the grounding lines I had.  Couldn't ever figure out where, though.

Title: Re: my ipac 4 not responding!
Post by: bossyman15 on June 07, 2006, 12:16:33 am

Well once again I forgot to update my current status...

Turns out I just had to plug the usb into different slot. Seems that I would have to do that every time I unplug my ipac4

Title: Re: my ipac 4 not responding!
Post by: cdbrown on June 07, 2006, 08:06:04 am

So was that usb slot not working at all or just with the ipac?  Curious to know why using the other USB slot worked.

Title: Re: my ipac 4 not responding!
Post by: bossyman15 on June 08, 2006, 04:22:20 am

Quote from: cdbrown on June 07, 2006, 08:06:04 am

So was that usb slot not working at all or just with the ipac?  Curious to know why using the other USB slot worked.

i don't know why. my computer are weird. everything i own are weird i dunno why. i must be cursed.