Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: gamegeek on June 03, 2006, 10:04:52 am

Title: WG K6100 parts
Post by: gamegeek on June 03, 2006, 10:04:52 am

Hi guys,
I was wondering if anyone could help me out in finding some WG K6100 monitor parts? Had a tragic disaster while moving and now I need to start over and do a total rebuilt of the monitor  :'(  Can anyone help me out? I am looking for the HV PSU, CRT neck board and the deflection yoke/coil. Any help would be greatly appreciated!

Title: Re: WG K6100 parts
Post by: Ken Layton on June 03, 2006, 10:38:47 am

The high voltage board is available as a reproduction part from electronicamuse@aol.com

However the other parts like neckboard and yoke are not. For those you'll have rob from a junked model.

Title: Re: WG K6100 parts
Post by: gamegeek on June 03, 2006, 11:20:49 am

Hi Ken,
Thank you so much for your lead!!  :notworthy: Very much appreciate your help!! Do you know if its a complete module? or just parts for the HV PSU?

Title: Re: WG K6100 parts
Post by: Ken Layton on June 03, 2006, 12:16:20 pm

It's a complete circuit board ready to go.