Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: lettuce on April 22, 2006, 03:01:09 pm

Title: Sugguestions/Opinions on my CP before cutting
Post by: lettuce on April 22, 2006, 03:01:09 pm

Just like peoples suggestion and opinions on my CP desgin before i begin cutting, anything i should change or any real big mistakes i may have made?

(http://show.imagehosting.us/show/1317903/0/nouser_1317/T0_-1_1317903.JPG) (http://www.imagehosting.us/index.php?action=show&ident=1317903)

Player 1&2 sticks shall be Happ 49-way with floyds rotary conversion
Player 3&4 sticks shall be Happ Competiton
2 sticks in the middle of the CP are Happ top fire sticks
The trackball shall be Happ 3" translucent blue
not sure on the spinner yet
All buttons shall be Happ translucent

Title: Re: Sugguestions/Opinions on my CP before cutting
Post by: mccoy178 on April 22, 2006, 03:52:29 pm

I'm tellin' ya, if you have even an idea that you want to play golden tee, you better move that spinner.  Other than that, it looks great!

Title: Re: Sugguestions/Opinions on my CP before cutting
Post by: blakes on April 22, 2006, 04:25:00 pm

The buttons on the left and right of the middle button don't look like they are the same distance apart from the middle button.

Title: Re: Sugguestions/Opinions on my CP before cutting
Post by: lettuce on April 22, 2006, 04:37:45 pm

Quote from: mccoy178 on April 22, 2006, 03:52:29 pm

I'm tellin' ya, if you have even an idea that you want to play golden tee, you better move that spinner.  Other than that, it looks great!

Yeah i did move it up a bit, i didnt want to move it up too much other wise it was become uncomfortable to use? @ blakes you maybe right, ill have a look. You dont think player 3&4 controls are too close to P1&2?

Title: Re: Sugguestions/Opinions on my CP before cutting
Post by: lettuce on April 23, 2006, 06:29:17 am

So what keyboard/how many keyboard encoders would i need for that CP setup? Will 2 x GP-Wiz49 cover all the inputs, or will i need a I-PAC4 aswell? Also do i need a Opti-PAC for the spinner, as the trackball is a Happ USB/PS2 one, so i wont need a Optic-PAc for that, is there a spinner that uses USB/PS2, cos then i wouldnt need a Opti-PAC at all unless i need one for the 49ways with floyds conversions?

Title: Re: Sugguestions/Opinions on my CP before cutting
Post by: destructor on April 23, 2006, 06:59:33 am

I don't know if you whenever play on topfire joysticks, espacially on 2-hand games. If you use these topfires for 2-hand games, distance between these joysticks is too large.

Title: Re: Sugguestions/Opinions on my CP before cutting
Post by: lettuce on April 23, 2006, 07:47:49 am

I wasnt really think about using em for 2 handed games, just for left and right handed players, when used in conjuction with the spinner, mainly Tron. What/how many games, use 2 handed top fire sticks? And how many use top fire and spinner combo, just Tron?

Title: Re: Sugguestions/Opinions on my CP before cutting
Post by: lettuce on April 23, 2006, 08:11:12 am

just measured the distance between the 2 top fires, and there only 16 inches apart, which seems ok

Title: Re: Sugguestions/Opinions on my CP before cutting
Post by: Xam on April 23, 2006, 11:12:42 am

Quote from: lettuce on April 23, 2006, 06:29:17 am

So what keyboard/how many keyboard encoders would i need for that CP setup? Will 2 x GP-Wiz49 cover all the inputs, or will i need a I-PAC4 aswell? Also do i need a Opti-PAC for the spinner, as the trackball is a Happ USB/PS2 one, so i wont need a Optic-PAc for that, is there a spinner that uses USB/PS2, cos then i wouldnt need a Opti-PAC at all unless i need one for the 49ways with floyds conversions?

The spinner by Groovy Game gear hooks strait into the computer...no optipac necessary. I think SlikStiks Tornado spinner is available with the same feature.

Xam