Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: leapinlew on April 18, 2006, 01:54:03 pm

Title: Return to Center Happs Shifter question
Post by: leapinlew on April 18, 2006, 01:54:03 pm

I have this shifter for my driving cabinet -

http://www.happcontrols.com/driving/50008300.htm (http://www.happcontrols.com/driving/50008300.htm)

The turbo button on the handle has a wire sticking out that is some sort of 2 prong molex connector. Does anyone know how I can connect this to an ipac? I assume cut the molex connector off and run the ground to one and the other wire connects it to the ipac as a button. I'm used to having 3 connectors a ground, NC, and NO plug.

Am I understand this right?

Title: Re: Return to Center Happs Shifter question
Post by: Flinkly on April 18, 2006, 02:18:48 pm

a button usually only uses 2 of the three plugs.  think of it as a pushbutton which you usually make NO.  The turbo button is probably the same and hook up just like you said.