Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: pointdablame on April 07, 2006, 02:19:47 pm

Title: FS/FT: Happ 3" Trackball and Tekken 3 PCB with marquee [US-NJ]
Post by: pointdablame on April 07, 2006, 02:19:47 pm

Contact Info:
PM's here work just fine
Email: pointdablame AT gmail DOT com
AIM: pointdablame
Heatware: pointdablame

NOTE:  Because of school, I can only ship Fridays, Saturdays, or Monday if I know about it during the weekend.  Please keep that in mind.

I have to move a few extra items so that I can't get started on some new projects, so these have to go.

1)  Happ 3" Trackball - white trackball - $45 shipped or best offer

This trackball was used for 5 or 6 months on an old project.  No discoloration on the ball itself.  I just disassembled it and cleaned it all up, it's in very good shape.  Rollers are good, and have no grooves in them.  They roll free, but can probably use a bit of oil for the best performance.  I will oil it myself before shipping if I can find where I put the damn oil.  :banghead:

This doesn't have an encoder.  It has green Happ PCB boards and the 6pin molex.  You will need a mouse hack/optipac/optiwiz to interface this.  I can throw in a few buttons if you need mouse buttons... I have a bunch of colors, just ask.
   TRADED TO STOBE


2) Tekken 3 PCB with Marquee - $70 + shipping

This was in a MK cab I bought a while back.  It works perfectly and was used for a while on and off in my JAMMA machine.  I have to pull this to be sure, but I believe it is a Rev. B board... I'll get the info in a bit and post it here.  When I first got it a friend said he didn't think this version was in MAME, but I'd have to look into that.

I also have the Tekken 3 marquee for it.  Its in very good shape except for some corner damage on 3 corners.  Once installed, you can't see it. 



I'm always open to trades too :)  Feel free to offer whatever, the worst I can say is no.  A few things I can definitely use are:

- two Sega cocktail control panels
- Jpac
- Arcade VGA
- 2 Wico 4way leafswitch joysticks OR 2 Ms Pac Reunion 4ways
- replacement Wico leafswitches

Title: Re: FS/FT: Happ 3" Trackball and Tekken 3 PCB with marquee [US-NJ]
Post by: nullb0y on April 07, 2006, 08:34:03 pm

pm sent

Title: Re: FS/FT: Happ 3" Trackball and Tekken 3 PCB with marquee [US-NJ]
Post by: pointdablame on April 07, 2006, 09:26:13 pm

Quote from: nullb0y on April 07, 2006, 08:34:03 pm

pm sent

Replied.

Title: Re: FS/FT: Happ 3" Trackball and Tekken 3 PCB with marquee [US-NJ]
Post by: pointdablame on April 08, 2006, 06:47:47 pm

Someone must need a trackball or a nice fighting game :)

Title: Re: FS/FT: Happ 3" Trackball and Tekken 3 PCB with marquee [US-NJ]
Post by: woodygjw on April 08, 2006, 09:47:27 pm

pm sent

woody

Title: Re: FS/FT: Happ 3" Trackball and Tekken 3 PCB with marquee [US-NJ]
Post by: pointdablame on April 10, 2006, 02:25:37 pm

Trackball is pending, but the Tekken board is still available.

Does anyone know if my price on the PCB is realistic?  I'm only going off eBay prices, which seem to be in the $75-100 range, but I know eBay prices can be pretty inflated sometimes.

Title: Re: FS/FT: Happ 3" Trackball and Tekken 3 PCB with marquee [US-NJ]
Post by: pointdablame on April 15, 2006, 10:53:10 am

Trackball has been traded to Stobe :)

I updated my wanted list.   Now are there any Tekken fans here?