Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: quarterback on April 03, 2006, 01:56:15 am

Title: now SOLD: Ms. Pac Reunion with 3/4" longer Wico red balltop for wooden CP
Post by: quarterback on April 03, 2006, 01:56:15 am

SOLD.  Thanks Mamemaster

This is a Ms Pac reunion 4-way that I've 'modified' to work with a red Wico balltop.  I did this because the Ms. Pac reunion stick is too short for use in a wooden CP (as many of you know).  Also, I thought the red balltop on the Ms. Pac Reunion looked way too small compared to all the other Wico balltops on my CP.

It works great, but since that point, I've re-thought my layout and removed the dedicated 4-way all together.  So here it is.

Below are some pics.  The difference between the old and the new shaft is almost exactly 3/4", putting it at the right height when mounted to the bottom of a 3/4" wooden CP.

$25 + shipping.   PayPal preferred.

(http://img86.imageshack.us/img86/5757/wicomspac4way003cropsml6mj.jpg)

Here is a comparison shot showing the different lengths of the two shafts:
(http://img86.imageshack.us/img86/6568/wicomspac4waycompare002cropsml.jpg)

Title: Re: FS: Ms. Pac Reunion with 3/4" longer Wico red balltop for wooden CP
Post by: MameMaster! on April 03, 2006, 11:33:48 am

consider that sold to MameMaster! (I sent you a PM).

Thanks!  8)

Title: Re: FS: Ms. Pac Reunion with 3/4" longer Wico red balltop for wooden CP
Post by: quarterback on April 03, 2006, 05:29:50 pm

SOLD and shipped.  Thanks MameMaster.