Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: conseit68 on March 29, 2006, 09:56:39 pm

Title: Everything must go...part 2 UPDATED 3/30
Post by: conseit68 on March 29, 2006, 09:56:39 pm

Listed below is everything I own. Everything must go. All fair offers accepted. Please email me at conseit68@comcast.net with any questions. Thanks for looking.

Brief explaination of items listed below are as follows:

coin parts -

• recently sand blasted coin door
• 5 working coin mechs
• misc parts to hold mechs in place

control panel parts -

• 8 locking panel clamps
• test switch plate
• 2 panel hinges
• cp lid prop with hardware (like a car hood) from 6 player XMEN
• 2 new keyed cam locks GONE

drawer extension -

• 1 18" brand new heavy duty keyboard slider extension

misc. -

• 18gauge stranded wire collors: pink, blue, green, red, purple, lt. green, brown, white, yellow, black @ 20' each GONE
• 4"x6" plexglass covers
• general carriage bolt hardware GONE
• brand new 36" piano hinge
• 3 micro buttons GONE
• 2 coin buckets with mounting hardware
• ps2 keyboard and mouse to usb adapter
• perfectly working sub...lot of bass out of this little thing

misc. 2 -

• 4 remaining button stickers that i used to sell
• 3 air circulation vents
• 2 fully working arcade power supplies GONE
• 1 fully working 230W pc power supply
• Geforce FX5200 AGP 8x video card with TV out (with all docs) GONE
• PCI slot 2 usb ports
• Hard drive adapter...ide to laptop
• 6' s-video cable
• Dell brand s-video out adapter

Title: Re: Everything must go...part 2
Post by: AlexC on March 29, 2006, 11:30:13 pm

PM sent on some stuff...

Title: Re: Everything must go...part 2
Post by: quarterback on March 29, 2006, 11:46:22 pm

I hope your buyers have better luck than I did when I bought two "tested and working 100%"  49-way joys from you and found out that neither of them worked correctly.

Here's the 5-day long thread of me trying to get the 49-ways to work and discovering the electronics were screwed up: http://forum.arcadecontrols.com/index.php?topic=44118.0   
Clearly they had been well "tested" before I bought them.  ::)

Good luck potential buyers....

Title: Re: Everything must go...part 2
Post by: conseit68 on March 30, 2006, 10:30:41 am

quaterback...while i appreciate the troubles you have had. the flame is unwarrented and unjust. those joys worked 100% as stated way back then prior to being shipped out. I have bought, sold , traded, given away and tried to contribute many things to this site since i first became a member with 99% of the transactions going very smooth and all parties being happy. there is always that once in a while that everything isnt perfect and for that i apologize but again the flame is uncalled for if you still have things that i can help you with then :censored: just call me. 240-398-1149. 

Title: Re: Everything must go...part 2
Post by: nullb0y on March 30, 2006, 01:05:02 pm

pm sent about the 5200

Title: Re: Everything must go...part 2
Post by: nullb0y on March 30, 2006, 01:29:19 pm

i also sent an e-mail but your address bounced

Title: Re: Everything must go...part 2
Post by: Timoe on March 30, 2006, 01:55:08 pm

For the record, I have had GOOD dealings with conseit68


I bought some artwork off of him that was top notch, packaged well and shipped quickly.

Title: Re: Everything must go...part 2 UPDATED 3/30
Post by: nullb0y on April 01, 2006, 02:18:47 am

the video card will be mine oh yes it will be mine

Title: Re: Everything must go...part 2 UPDATED 3/30
Post by: conseit68 on April 08, 2006, 11:33:43 am

Last Chance...any takers on the remainder?...

Title: Re: Everything must go...part 2 UPDATED 3/30
Post by: pointdablame on April 08, 2006, 12:50:44 pm

PM sent

Title: Re: Everything must go...part 2 UPDATED 3/30
Post by: jcroach on April 11, 2006, 08:59:38 am

Hey, I sent you an e-mail on those coin mech holder and never heard back.  I'll send you a PM right now.