Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Timoe on March 28, 2006, 11:27:08 pm

Title: Ding Dang Dust Washers and stainless steel handles from slikstik!
Post by: Timoe on March 28, 2006, 11:27:08 pm

I've got these stainless steel joystick handles from slikstik.  6 of them actually.  When you replace the stick in a competition or a super, you end up with an unsightly gap.  The stainless steel sticks dont fill out the hole in the dustwasher completely.

Anyone out there have the answer on the best replacement dustwasher for this situation?

I would think a competition dustwasher would be best but even they still have a gap.

Title: Re: Ding Dang Dust Washers and stainless steel handles from slikstik!
Post by: whammoed on March 29, 2006, 09:46:59 am

I think I have some of these left:
http://forum.arcadecontrols.com/index.php?topic=32270.msg275628#msg275628
I can enlarge the hole if need be.
OR
If you can find dust washers that are too small, simply use a step bit to enlarge the hole.  Works great on plastic.
Franco made some pretty slick looking stainless steel washers for his custom sticks...fancy!