Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: rlemmon on March 18, 2006, 04:16:46 pm

Title: I rigged my Reject Buttons to incert credits when pressed
Post by: rlemmon on March 18, 2006, 04:16:46 pm

Hi guys. I thought I would Post some pics of how I did this in case anyone is interested. I cut out two squares of Half inch mdf and drilled a 1 1/8 hole in each for a button.

Next  i removed two of the screws that hold the reject button bezels on each side , Then i just replaced them with longer screws. I left two of the original screws in each bezel to hold them in tightly. I ran out of wire to do the other side I'm waiting for radio shack to get some more

 I guess its kind of crude but it dose the job for now. At some point I will buy a real coin door with Machs and wire it to take tokens.

(http://img294.imageshack.us/img294/343/coindoor14hb.th.jpg) (http://img294.imageshack.us/my.php?image=coindoor14hb.jpg)


(http://img476.imageshack.us/img476/3272/coindoor20nl.th.jpg) (http://img476.imageshack.us/my.php?image=coindoor20nl.jpg)

(http://img294.imageshack.us/img294/9900/coindoor33gq.th.jpg) (http://img294.imageshack.us/my.php?image=coindoor33gq.jpg)

Title: Re: I rigged my Reject Buttons to incert credits when pressed
Post by: rlemmon on March 19, 2006, 07:42:11 am

Any thoughts guys ? ???

Title: Re: I rigged my Reject Buttons to incert credits when pressed
Post by: HaRuMaN on March 19, 2006, 07:50:59 am

That's a pretty cool idea, I like it because it doesn't add an extra button, it makes use of what's already there.  Good work! :)

Title: Re: I rigged my Reject Buttons to incert credits when pressed
Post by: Franco on March 19, 2006, 08:19:07 am

Good work mate, nice solution!  :)

Title: Re: I rigged my Reject Buttons to incert credits when pressed
Post by: rlemmon on March 19, 2006, 08:44:11 am

Thanks guys  :)