Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: bossyman15 on March 10, 2006, 10:59:26 pm

Title: yeah i know the another "how to install monitor bezel" question...
Post by: bossyman15 on March 10, 2006, 10:59:26 pm

ummm i wanted to know how you guys here make bezel and glass stay in place

see below for photo of my lusid cab (sorry its phone cam photo)

many arcade i see in arcade i look at top of monitor glass but i couldn't fiqire out how its hold it in place because there are nothing there holding it in place so i would guess it was speaker panel holding it in place mmmmm...

Title: Re: yeah i know the another "how to install monitor bezel" question...
Post by: grantspain on March 12, 2006, 01:58:25 pm

most the cabs i work with tend to have thin strips of mdf/wood going down both sides of the monitor housing,some have a slot at the top for the glass,others have a metal bracket,the bottom part tends to have a counter cut L-shape for the glass to sit on or again a metal bracket.those strips are to prevent the glass dropping onto the tube when you clean it.