Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: flyinhi007 on March 05, 2006, 11:29:54 pm

Title: help Wiring buttons and controllers to JPAC
Post by: flyinhi007 on March 05, 2006, 11:29:54 pm

Ok i have looked all over the place and cant seem to find a way to wire my jpac to my harness....i looked on ultimarc.com but no luck, does anyone have a clue if i can just add my harness to the buttons or do i need to wire them to the small switches labeled "1SW ...2SW etc...."  id rather just wire through the harness.
is this possible?

Title: Re: help Wiring buttons and controllers to JPAC
Post by: BobA on March 06, 2006, 12:08:51 am

The fingers of the jpac plug into the 56 pin jamma connector on your harness.  The  player 1 and 2 switch inputs are for buttons 4 and above.  player 1/2 4 is also inclueded in the jamma connector.