Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: markymarky99 on March 05, 2006, 09:58:07 pm

Title: How Do I add a bill validator to Jamma ?
Post by: markymarky99 on March 05, 2006, 09:58:07 pm

HI, I have a MARS ELECTRONICS (VFM4-R1) BILL validator that was working in a Touch Master 8000 machine.  I'm converting that cabinet into a very cool multi jamma machine.  Does anyone know how to wire the BILL VALIDATOR into my jamma wiring ?  I've included a pic, there's a lot of wires coming out of the validator.  7 wires from one part (white, red, green, blue, orange, and 2 black!)  and another group of wires (2 black, white and yellow) from anothe part.  KEN LAYTON mentioned something about wiring into the COIN 2 on a jamma harness, how many  of these wires need to be running someplace ?  Thanks again guys. 

Title: Re: How Do I add a bill validator to Jamma ?
Post by: Ken Layton on March 05, 2006, 11:49:39 pm

Bill acceptors come in many operating voltage and signal output types. Best to contact tech support at the manufacturer, www.meiglobal.com