Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: markymarky99 on February 27, 2006, 07:15:45 am

Title: jamma system, mirror inside cab, how do I change picture?
Post by: markymarky99 on February 27, 2006, 07:15:45 am

HI, I have a gorgeous SPACE INVADERS cab that will play multi jamma games.  I need to put a new monitor in it.  However, this uses a reflection from the bottom of the game up to where the screen is.  How do I change the wiring on the monitor so that when the mirror reflects the picture, it will look straight ?  thanks guys, you should see how clean this cab is !

Title: Re: jamma system, mirror inside cab, how do I change picture?
Post by: Jess-- on February 27, 2006, 09:49:06 am

you should be able to reverse the picture fairly easily by swapping the polarity on the yoke wires (some monitors have 2 plugs on the chassis that will reverse this for you, others have switches and others you will need to swap wires around on the yoke itself)

all in all this should not be a problem