Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: USSEnterprise on February 24, 2006, 09:33:31 pm

Title: router bit for T-Molding and for leveling CP
Post by: USSEnterprise on February 24, 2006, 09:33:31 pm

What size/type router bit would I use for the 3/4" T-Molding at Groovy Game Gear? I have a Ryobi router

Title: Re: router bit for T-Molding
Post by: nostrebor on February 24, 2006, 09:36:58 pm

http://forum.arcadecontrols.com/index.php?topic=24558.0

here is one link. A search for "slot cutter" will bring up 8 meelion more ;)

Title: Re: router bit for T-Molding
Post by: MYX on February 24, 2006, 09:51:18 pm

1/16th. I have a ryobe as well. I love it.

Title: Re: router bit for T-Molding
Post by: USSEnterprise on February 25, 2006, 02:17:13 pm

Okay, cool. And what type of bit to make a joystick mounting plate flush with the CP surface? I was gonna use a chisel, but tested it on a piece of ---steaming pile of meadow muffin--- wood, and it came out very, very bad