Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Mikew88 on February 22, 2006, 08:42:17 pm

Title: Wells Garnder V1000 Jittering
Post by: Mikew88 on February 22, 2006, 08:42:17 pm

Hey everyone,

Have a little problem here. I have a WG V1000 in my warlords cabinet. When the game is on for maybe a few minutes, the picture start to jitter, Violently. Then it stops for a few seconds and starts all over again. Im not sure what is causing the picture to move like this. The focus and brightness are fine, maybe a cap kit? I doubt it has ever had a cap kit in 25 years. Let me know what you think.

Thanks in advance
Mike

Title: Re: Wells Garnder V1000 Jittering
Post by: Nipedley on February 22, 2006, 09:24:30 pm

A cap kit is always a good place to start, and solved *extreme* jittering on both of the monitors I worked on. Worth a shot at least  :)

Title: Re: Wells Garnder V1000 Jittering
Post by: lettuce on February 27, 2006, 03:58:21 pm

what are cap kits and how do you fit them??

Title: Re: Wells Garnder V1000 Jittering
Post by: grantspain on February 27, 2006, 04:16:54 pm

also could be ht arcing from the ht cap,faulty lopti or poss dry joint.worth tapping the chassis to see if you get any reaction.

Title: Re: Wells Garnder V1000 Jittering
Post by: mahalos on February 27, 2006, 07:27:10 pm

what resolution are you running at, as i think i may have a similar problem. Mine only happens when i running 640x480 (arcadevga). i takes about 10-20mins before the image starts to get jittery.