Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: Bent Brother on February 11, 2006, 07:51:21 pm

Title: Nintendo Parts (need some)
Post by: Bent Brother on February 11, 2006, 07:51:21 pm

Looking for a CP for my Nintendo Vs. Cab
Something with more buttons on it ?
Not like a Donkey Kong that only has 1 button on it.

thanks!


Oh yeah i could use some wiring for my empty POPEYE cab too!

Title: Re: Nintendo Parts (need some)
Post by: pcates on February 11, 2006, 08:26:35 pm

I made a CP for my donkey kong out of 1/2 " plywood. Drill as many holes as you need. Place on your overlay. Done. Price about $5 ;D

Title: Re: Nintendo Parts (need some)
Post by: BUCKETHEAD on February 11, 2006, 08:51:16 pm

I think a VS. Control Panel is made of metal though ?

Are these what you need ?


http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7590018473&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1



http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7590021580&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1

Title: Re: Nintendo Parts (need some)
Post by: Bent Brother on February 11, 2006, 08:57:29 pm

Bingo!
That would work great!
If the price doesn't go to high?
I could you use that wiring also in the other auction.
A plywood Cp would work i think?
But once you buy the plywood, Then use the gas to cut it.
Then buy a overlay, Then sticks and buttons and wire to go in it.
I think it would be more than $5.00 ??

Thanks for the help though!  :)

Title: Re: Nintendo Parts (need some)
Post by: pcates on February 12, 2006, 07:52:15 am

Quote from: Bent Brother on February 11, 2006, 08:57:29 pm

Bingo!
That would work great!
If the price doesn't go to high?
I could you use that wiring also in the other auction.
A plywood Cp would work i think?
But once you buy the plywood, Then use the gas to cut it.
Then buy a overlay, Then sticks and buttons and wire to go in it.
I think it would be more than $5.00 ??

Thanks for the help though!  :)

Sorry, I forgot about the overlay price... I had one lying around. I was just talking about the price of the wood..... If you can a metal Vs for not too much that would definitely be easier. Do you have any coin op places near you??? That kind of stuff they will usually give up cheap. There is no market for a nintendo vs anymore in their business.  I have a couple of good ones in PA if you need them drop me a PM.
Patrick

Title: Re: Nintendo Parts (need some)
Post by: Bent Brother on February 12, 2006, 08:35:17 am

Quote

Sorry, I forgot about the overlay price... I had one lying around. I was just talking about the price of the wood.....

That is ok man! Thanks for the help!
I am watching this stuff on eBay.
Hopefully it will not go too high.
I live waaaay out in the stix, So this stuff is hard for me to get.
Texas is where i am at.   :)

Title: Re: Nintendo Parts (need some)
Post by: SithMaster on February 12, 2006, 12:45:27 pm

im pretty sure the vs metal cps dont go over 2 usd plus shipping but i havent looked at them in a while