Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: NipRing on February 07, 2006, 03:25:22 am

Title: Next problem, thanks
Post by: NipRing on February 07, 2006, 03:25:22 am

Ok, i got the pc to work correctly with my neo29 candy cab. Loaded the drivers and the ati panel. However, for some reason the winIPAC setup panel doesnt recognize the joysticks or either "B" button. It recognizes the credit, player 1 start, player 2 start, both "A"s, "C's, and "D"s. Everything is connected correctly to the jamma harness, infact this used to house my 6-slot mvs until i bought a second neo29 cab. Also, I'd really like to use the Arcade Maximus frontend, but which version of MAME should i use? MameDOS, Windows, or the 32?

thanks again
~bill

Title: Re: Do i have a dead ArcadeVGA card???
Post by: Thenasty on February 07, 2006, 11:37:10 am

I dunno about hooking it up to TV but there's one thing you mentioned, your use the PC MONITOR, ArcadeVGA are for ARCADE MONITORS.

Title: Re: Do i have a dead ArcadeVGA card???
Post by: eccs19 on February 07, 2006, 12:57:59 pm

If the machine seems to be booting up, but your not getting any picture, then Thenasty is probably right.  If the machine seems to not even be booting, make sure the card is seating in all the way.  It could also be just the fact your running ME.  Most computer guy's would rather run Win 98se over ME.  ME has always cause a lot of people grief.

Title: Re: Do i have a dead ArcadeVGA card???
Post by: pcates on February 07, 2006, 01:57:13 pm

I second the ME thing.... ME sucks. Lots of random unexplained errors.

Title: Re: Next problem, thanks
Post by: NipRing on February 07, 2006, 11:57:08 pm

same thread, new problem in the first post.
thanks
~bill