Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: redfivexw on February 06, 2006, 01:24:33 pm

Title: how do i set pac man to cocktail or upright setting?
Post by: redfivexw on February 06, 2006, 01:24:33 pm

I have a Super Pac Man machine (dedicated).  I just installed a jamma adapter on the board and wired it up with a switcher, new wires etc.  The only problem i have is the screen flips for cocktail mode when it is player 2's turn.  Does anyone know how you set the board for regular mode?  there is nothing in the dipswitches that i can see.  anyone?

Title: Re: how do i set pac man to cocktail or upright setting?
Post by: 2PacMan on February 06, 2006, 01:51:25 pm

It's one of the dipswitches...can't remember which one, it should say in the manual.

Title: Re: how do i set pac man to cocktail or upright setting?
Post by: redfivexw on February 06, 2006, 02:16:52 pm

I just downloaded the dipswitches, there is no mention of cocktail/upright at all

Title: Re: how do i set pac man to cocktail or upright setting?
Post by: Dav on February 06, 2006, 05:41:02 pm

Quote from: redfivexw on February 06, 2006, 01:24:33 pm

I have a Super Pac Man machine (dedicated).  I just installed a jamma adapter on the board and wired it up with a switcher, new wires etc.  The only problem i have is the screen flips for cocktail mode when it is player 2's turn.  Does anyone know how you set the board for regular mode?  there is nothing in the dipswitches that i can see.  anyone?

It's probably a wire to the edge connector was grounded.  Check the adapter for a jumper, or talk to whoever sold you the adapter.

 

Title: Re: how do i set pac man to cocktail or upright setting?
Post by: markrvp on February 08, 2006, 06:55:45 pm

Quote from: Dav on February 06, 2006, 05:41:02 pm

Quote from: redfivexw on February 06, 2006, 01:24:33 pm

I have a Super Pac Man machine (dedicated).  I just installed a jamma adapter on the board and wired it up with a switcher, new wires etc.  The only problem i have is the screen flips for cocktail mode when it is player 2's turn.  Does anyone know how you set the board for regular mode?  there is nothing in the dipswitches that i can see.  anyone?

It's probably a wire to the edge connector was grounded.  Check the adapter for a jumper, or talk to whoever sold you the adapter.

 

On a regular Pacman PCB it is indeed grounding one pin to enable cocktail mode.

Title: Re: how do i set pac man to cocktail or upright setting?
Post by: redfivexw on February 09, 2006, 09:33:55 pm

thanks everybody, i found the pin and have taken care of it, it is working perfectly now.