Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: SlammedNiss on January 30, 2006, 09:25:49 pm

Title: what else will work?
Post by: SlammedNiss on January 30, 2006, 09:25:49 pm

in the process of building my control panel, i've seemed to have lost one of the black washer-like things that go on the joystick to hide the hole made for the joystick. I looked at a local small hardware store for a black plastic washer, but they didnt have anything close.

the joystick was purchased from ultimarc, and i'd like to find an alternative to buying another controller.

the "washer" is 2 1/8" in diamer, with a ID of 5/8".

TIA

Title: Re: what else will work?
Post by: Tahnok on January 30, 2006, 10:13:56 pm

Contact Andy and see if he will sell you another one. That is probably the easiest.

Title: Re: what else will work?
Post by: CheffoJeffo on January 30, 2006, 10:20:32 pm

What size is it ... I'll check my big bag of joystick parts.

Cheers.

Title: Re: what else will work?
Post by: TravistyOJ on January 30, 2006, 10:25:23 pm

I have a lot of thes lying around, I can check for you and see if i have one

Title: Re: what else will work?
Post by: SlammedNiss on January 30, 2006, 10:25:48 pm

Quote from: CheffoJeffo on January 30, 2006, 10:20:32 pm

What size is it ... I'll check my big bag of joystick parts.

Cheers.

OD is 2 1/8" and ID is 5/8"

thanks

Title: Re: what else will work?
Post by: TravistyOJ on January 30, 2006, 10:32:11 pm

Found one, PM me your address and I can send it to yah.

Title: Re: what else will work?
Post by: CheffoJeffo on January 30, 2006, 10:35:27 pm

C'mon ... I was just posting that I had found a couple that size (although most of mine are smaller) ...  ;D

Nice job, TOJ.

Cheers

Title: Re: what else will work?
Post by: TravistyOJ on January 30, 2006, 10:39:02 pm

Haha, I win.......nothing :)