Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: markymarky99 on January 29, 2006, 11:01:15 pm

Title: Missing wire in jamma harness, how to replace ?
Post by: markymarky99 on January 29, 2006, 11:01:15 pm

Hi, I have an arcade cabinet already wired up JAMMA, however, I need number 15 on the harness to hookup an interlock switch so that I can negotiate the multi board menu system.  The entire wire and pin is missing, there's just a hole there.  I've purchased pin after pin but can't seem to find what I need to insert into this hole and run a new wire.  I don't want to wire directly to the jamma board as this is a 500 dollar unit.  Not worth ruining.  What is another way of getting this stubborn number 15 pin to work for me ?  any ideas ?  The hole in the harness seems to be bigger than the standard jamma harness of today, this is an old cabinet.

Title: Re: Missing wire in jamma harness, how to replace ?
Post by: Ken Layton on January 30, 2006, 01:37:08 am

If your Jamma harness connector is the black one then Bob Roberts sells the correct pins to insert.

If your Jamma harness connector is the tiny blue one you're screwed.