Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Sinner on January 12, 2006, 02:15:42 pm

Title: Monitor repair in GTA, Ontario?
Post by: Sinner on January 12, 2006, 02:15:42 pm

Is there anyone in the GTA, Ontario, Canada that does monitor repair?  I'm sure Starburst would do it, but I'm afrad as to how much it would cost.
I assume it would be a capkit that is needed.  I have no picture at all on the monitor, but the game sounds like it works fine...
Anyway, if anyone knows of some/place, I would greatly appreciate a point in the right direction...
Thanks,

Matt

Title: Re: Monitor repair in GTA, Ontario?
Post by: menace on January 12, 2006, 04:34:59 pm

Quote

Hello group,
   I repair all kinds of "Arcade / Computer monitors" at a
reasonable rate in Toronto/GTA area. I've been in business
for over 25 years. I'm located in Thornhill. For more help
or information;
                         reply to : service.ierr@rogers.com
                         phone: (647)295.2664

Best Regards,

p.s. I also have a few monitors for sale. 

not me --its from a previous thread.

Title: Re: Monitor repair in GTA, Ontario?
Post by: Scott84 on January 13, 2006, 02:30:37 pm

Check www.cgcc.ca -- Coin Op Forum... Alot of GTA Arcade Guys.

Title: Re: Monitor repair in GTA, Ontario?
Post by: Sinner on January 13, 2006, 03:37:10 pm

Thanks guys, I appreciate it...

Title: Re: Monitor repair in GTA, Ontario?
Post by: Sinner on January 15, 2006, 07:28:59 pm

I looked inside the machine today, and it looks like it says RCA 19VLTP22...CheffoJeffo says that is the type of tube, but there's a chassis number somwhere...anyone know where I need to look??

Title: Re: Monitor repair in GTA, Ontario?
Post by: Sinner on January 15, 2006, 08:13:38 pm

Looked a little closer, and there's a number here...looks like C32.
69X1178-100
Model No. 19K4906

That's all I can see on there, around the tube, so far...

Title: Re: Monitor repair in GTA, Ontario?
Post by: Sinner on January 16, 2006, 02:31:40 pm

OK, so I now know I have a WG 19K4906, and I've been researching to see if I could learn to fix this thing by myself...it's a little daunting, due to the fact that there are so many things it could be...any words of advise for someone going at this for the first time?

Title: Re: Monitor repair in GTA, Ontario?
Post by: eccs19 on January 18, 2006, 01:26:29 pm

Quote from: Sinner on January 16, 2006, 02:31:40 pm

OK, so I now know I have a WG 19K4906, and I've been researching to see if I could learn to fix this thing by myself...it's a little daunting, due to the fact that there are so many things it could be...any words of advise for someone going at this for the first time?

I did a cap kit in my monitor.  Not to difficult if you take your time.  Just make sure to dis-charge first, or you may be in for one heck of a shock!

Title: Re: Monitor repair in GTA, Ontario?
Post by: menace on January 19, 2006, 07:47:37 am

did you get the flowchart for this monitor yet?  I have one i could send you if need be.

Title: Re: Monitor repair in GTA, Ontario?
Post by: Sinner on January 19, 2006, 09:05:26 am

Quote from: menace on January 19, 2006, 07:47:37 am

did you get the flowchart for this monitor yet?  I have one i could send you if need be.

No not yet...someone was going to send me one, but my mailbox was full, and I don't know if they're going to resend...
If you have a copy, I would greatly apprecxiate getting a copy...

Title: Re: Monitor repair in GTA, Ontario?
Post by: menace on January 19, 2006, 10:03:15 am

sent.

Title: Re: Monitor repair in GTA, Ontario?
Post by: Sinner on January 19, 2006, 02:14:43 pm

Quote from: menace on January 19, 2006, 10:03:15 am

sent.

I got it...thanks...i really appreciate it...