Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: MameMaster! on January 02, 2006, 04:02:41 pm

Title: Neo Geo 6 Slot question
Post by: MameMaster! on January 02, 2006, 04:02:41 pm

OK.... I actually just emailed the resident Neo Geo "expert" Gozur

Title: Re: Neo Geo 6 Slot question
Post by: walls83 on January 02, 2006, 04:38:19 pm

you should prolly just give them to me so I could do 3 years of research to make sure your safe.  :laugh:

Title: Re: Neo Geo 6 Slot question
Post by: muell67 on January 02, 2006, 05:06:24 pm

I have a one slot I would be willing to trade you. Then you wouldnt have to worry  :laugh:

Title: Re: Neo Geo 6 Slot question
Post by: SuperGunGuru on January 03, 2006, 12:15:20 am

A 6 slot Neo Geo board will not run correctly with a standard JAMMA setup. It uses a modified JAMMA wiring with the difference being for the select game button and stereo wiring so that is why you can't change games and have no sound.  Check out www.hardmvs.com for more info.

Title: Re: Neo Geo 6 Slot question
Post by: MameMaster! on January 03, 2006, 09:17:55 am

Quote from: SuperGunGuru on January 03, 2006, 12:15:20 am

A 6 slot Neo Geo board will not run correctly with a standard JAMMA setup. It uses a modified JAMMA wiring with the difference being for the select game button and stereo wiring so that is why you can't change games and have no sound.  Check out www.hardmvs.com for more info.

thanks for the info. I really appreciate it!
....what a bummer though.  :P

Title: Re: Neo Geo 6 Slot question
Post by: Goz on January 03, 2006, 10:39:30 am

The pinout is on HARDMVS and it shouldn't be too hard to modify the supergun to do MVS.

<disclaimer>* For the record, I am far from a NEO GEO expert. I have some of the boards and alot of the carts, but far from an expert. </disclaimer>