Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: rockmes on December 31, 2005, 08:31:56 pm
-
l am from Australia , and would like to know from whom could l buy the perfect 360 joysticks. Is there anybody locally that sells them, or would l have to purchase them from oversees? Who do you guys recommend?
tia
-
i carry them but im in the united states
thanks
divemaster
-
good.
How much for 2 shipped to Melbourne Australia?
-
These are also readily available from Ponyboy at a good price.
-
Thanks Ponyboy for the price.
l want to ask you a question- l have 2 new grovvygamegear ball top stainless
steel handles that l bought. l want to know if these will fit in the p360
joysticks. l have them in my competition joysticks at the moment.
let me know cos l am not sure it is worth upgrading my competition joysticks
for the p360 without using my new stainless steel handles. My competition joysticks
work grouse with the new handles, but there is so much hype for the p360, that l just want to try them.
Cheers
Rockmes
-
i carry them but im in the united states
thanks
divemaster
thanks divemaster for the email, l will get back to you if l am interested. l am just deciding (read my previous post)
Cheers
-
from some of the searches ive done l am pretty sure 10mm diameter shaft joystick handle will also fit the p360.
According to Oscar's diagrams, the P360 is .021 smaller than the Comp. That's pretty darn close, it's hard to even see if you just hold them up next to each other. But the Ultimate is WAY smaller than everything else. It's really not even close. In your other thread, where you compared Comps to Ultimates, didn't you notice this when you were trying to swap handles? The Ultimates are like half the diameter of everything else Happ makes. Forget it, they won't work.
How does a Happ P360 with a Wico Ball Top compare to a Wico joystick with a P360 adapter harness? Also does any one know if you can take the Happ P360 bat top handle and put it on a Wico 8-way leaf switch joystick?
I'm sending Christian at SlikStik a Wico assembly to test his pretty new p360 handles in, so he can verify that those will fit, anyway.
The Wico Ball Top shaft is larger than the one on the Ultimate so if the wico fits in a P360 then the shaft of the P360 must be larger than the ultimates right?
Absolutely right. In fact, just to settle this once and for all, I dug an Ultimate out of the junk box, and pulled a Wico handle. Here's a picture, Wico is on the left, Ultimate is on the right.
what do you guys reckon? will the groovygamegear 10mm diameter shaft fit the p360?
-
if l can get some advice on this , it would be a real help. :laugh:
Do you's think the groovygamegear stainless steel ball top handles which is 10mm diameter, will fit the Happ perfect 360 joysticks?
this will ultimately decide if l will purchase the p360. :-\ :'(
-
Email RandyT!
He is very helpful. Lord know he has worked me through some classic newbie problems...