Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: grantspain on December 21, 2005, 04:56:30 pm

Title: hantarex polo2 25(resolved)
Post by: grantspain on December 21, 2005, 04:56:30 pm

please help,i have a polo2 25 with a width\linearity fault.the picture is bowed at the sides(horizontal) and i think the fault is on the east\west correction board the only other thing i can think of is maybe at some point the chassis has been swapped and the resistors are incorrect to the tube type,any ideas?

Title: Re: hantarex polo2 25
Post by: censei on December 22, 2005, 09:31:47 pm

I believe there is a pin cush trim pot on hantarex monitors. You need to adjust it to straighten the picture.

Title: Re: hantarex polo2 25
Post by: grantspain on January 03, 2006, 03:43:53 pm

got it fixed in the end,turned out to be a dry joint on the east/west board and some very poor adjustment.