Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: miles2912 on December 13, 2005, 06:13:04 pm

Title: Quick button wiring question
Post by: miles2912 on December 13, 2005, 06:13:04 pm

Can I Connect 2 buttons to the same key mapping.  For example wire the ipac to a Barrier strip and then pull two wires off the barrier stip to 2 seperate buttons and then just use a common ground all around.  So when I hit either button it would register a left shift for example?

Don

Title: Re: Quick button wiring question
Post by: brophog on December 13, 2005, 06:20:58 pm

You could, but why go to all that trouble. Ipac lets you program the buttons!

Title: Re: Quick button wiring question
Post by: mccoy178 on December 13, 2005, 06:40:06 pm

I did that on my cabinet so I could play vpinball like a real pinball machine.

Title: Re: Quick button wiring question
Post by: miles2912 on December 13, 2005, 07:02:27 pm

Exactly what I want to use it for.  Pinball.   My mini-pac only has 16 buttons total so I have to conserve.  Thanks for the response guys.

Don

Title: Re: Quick button wiring question
Post by: markrvp on December 13, 2005, 07:15:12 pm

Yes, you can do that.