Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: kjoel0123 on December 03, 2005, 08:44:40 am

Title: Monitor scrolling
Post by: kjoel0123 on December 03, 2005, 08:44:40 am

I have a street fighter 2 hyper game in a ultimate mortal kombat 3 arcade, mk3 plays fine , but my sf2 game screen constantly scrolls, all control work fine, picture quality is good. I have disconnected the kick harness, screen still scrolls, Could this be a grounding issue with the board or a sync issue with the monitor?

Also several other jamma games that I have do not have this scrolling issue

My cabinet uses a standard jamma connector with a 19" arcade monitor, any ideas, please help, thanks..

Title: Re: Monitor scrolling
Post by: Nipedley on December 03, 2005, 08:50:01 am

You tried adjusting the Vertical Hold control, right?

Title: Re: Monitor scrolling
Post by: SirPeale on December 03, 2005, 09:08:13 am

Quote from: Nipedley on December 03, 2005, 08:50:01 am

You tried adjusting the Vertical Hold control, right?

Was just thinking that.  WTH does the kick harness have to do with video signal?

Title: Re: Monitor scrolling
Post by: Ken Layton on December 03, 2005, 09:46:19 am

Different game boards generate slightly different sync & video signals which sometimes require adjusting the monitor between different game boards.

Of course this is assuming that both gameboards are properly operating.

Title: Re: Monitor scrolling
Post by: kjoel0123 on December 08, 2005, 10:34:01 pm

I will try the vertical hold setting, thank you for the tip

Title: Re: Monitor scrolling
Post by: kjoel0123 on December 10, 2005, 10:00:45 pm

Thanks alot, it did the trick.....