Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: pninja005 on November 22, 2005, 10:55:02 am

Title: Namco System 22: how to calibrate steering wheel ?
Post by: pninja005 on November 22, 2005, 10:55:02 am

I have a Ridge Racer 2 twin cabinet.
I bought Rave Racer pcbs.

One players controls always steer to the left so it's undriveable  :(
How do you adjust / calibrate the steering wheel in a Namco cabinet ?

Thanks,

-Peter

Title: Re: Namco System 22: how to calibrate steering wheel ?
Post by: Minwah on November 28, 2005, 07:34:31 am

Doesn't it have a service mode switch anywhere?

Title: Re: Namco System 22: how to calibrate steering wheel ?
Post by: clanggedin on November 28, 2005, 12:07:25 pm

I have a Ridge Racer 2 upriight and mine has a service switch. I think I recall a calibration screen for the steering.

Title: Re: Namco System 22: how to calibrate steering wheel ?
Post by: Crowquill on December 02, 2005, 02:16:16 am

Found a downloadable manual for Ridge Racer 1. Might help.

http://www.crazykong.com/manuals/manuals%20r-z/

Excerpt from page 12:

3-4Adjusting the Game After Replacing Parts (Initializing the Game)

Be sure to adjust the game with the following the instructions below after
replacing any
part.  Otherwise,  the game will not function correctly.

1. Ensure that the accelerator and brake pedals are released and the
steering is in the centre.
2. Hold down the service switch and slide to the test switch to