Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: markymarky99 on November 20, 2005, 05:25:03 am

Title: help with jamma wiring to vision pro monitor?
Post by: markymarky99 on November 20, 2005, 05:25:03 am

hi, i picked up a 13" vision pro monitor from HAPPS for a cocktail game i'm building.  My JAMMA harness has 4 wires for monitor hookup,,, but the monitor has 7 wires coming out of it for hookup,,,  usually, with most monitors,  I match up RED, GREEN, BLUE, and twist 2 wires together (usually yellow and white) from the monitor and connect them to the one wire that is left from the jamma harness and WALLAH, all is well,,, what do i do with 3 extra wires from the VISION PRO?
Thanks, have a great day!

Title: Re: help with jamma wiring to vision pro monitor?
Post by: Jess-- on November 20, 2005, 06:34:03 am

cannot be 100% sure but you will probably find that the wires are as below

Red
Green
Blue
Video Gnd
H sync
V sync
Gnd OR Composite Sync ?

would suggest you get in contact with happs to find out the exact pinout