The NEW Build Your Own Arcade Controls

Main => Buy/Sell/Trade - non-retail => Topic started by: Wade on January 26, 2003, 11:06:29 am

Title: Wanted to buy or borrow: T-molding BIT
Post by: Wade on January 26, 2003, 11:06:29 am

I hope nobody minds the cross-post...

This weekend, I finally started cutting the wood for my cabinet.  I was thinking about assembly and I realized I am going to need to route the groove for the T-molding soon (before I can assemble most of the cab).

It seems these bits cost $40 or more, and I don't plan on building another cab later.  So I was hoping someone on this forum could do me a big favor, and either let me borrow their bit, or give or sell me their bit for a good price.  If you are interested in helping me out with this, I will supply a long list of internet references as I have bought and sold many things over the internet over the past couple of years.

Thanks!
Wade

Title: Re:Wanted to buy or borrow: T-molding BIT
Post by: mcleanjoel on February 02, 2003, 04:04:00 pm

Only $16 & free shipping at this place:

http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_slot.html