Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: PetitMorte on October 24, 2005, 12:17:51 pm

Title: Metal Burgertime CP question
Post by: PetitMorte on October 24, 2005, 12:17:51 pm

Howdy folks.

I have a "Burgertime" machine, and I'm looking for more of the metal control panels that it uses, in order to make alternate, swappable CPs.

The panel itself it pretty much "L" shaped, with three bits welded on to lock the panel down to the machine.

I've searched the past threads, but as far as I can tell, no one makes/sells replacement blank metal control panels for this type of machine.

Title: Re: Metal Burgertime CP question
Post by: AC. on October 24, 2005, 12:36:49 pm

Can't help you on the Burgertime CP, but I am glad I was able to help you find that avatar photo.  :o

Title: Re: Metal Burgertime CP question
Post by: jcoleman on October 24, 2005, 04:30:00 pm

That appears to be a standard Ms. Pac/Galaga-sized panel.

Check http://www.arcadeshop.com/parts.htm for MultiCade control panels.