Build Your Own Arcade Controls Forum

Main => Everything Else => Topic started by: Stingray on October 18, 2005, 09:17:08 am

Title: Terminator T-800
Post by: Stingray on October 18, 2005, 09:17:08 am
I used to be really into building sci-fi scale models, but I haven't built one in probably two years. This weekend I guess I caught the bug again. Went to my never ending supply of unbuilt kits and grabbed the one that caught my eye. Considering the fact that I haven't so much as looked at my model stuff in so long I think this one didn't turn out half bad.

Sorry about the crappy pics, I seriously need to get a new camera.

(http://www.stingraysmadness.com/misc/terminator/term2.jpg)

(http://www.stingraysmadness.com/misc/terminator/onbase.jpg)

(http://www.stingraysmadness.com/misc/terminator/back.jpg)

(http://www.stingraysmadness.com/misc/terminator/fromtop.jpg)

(http://www.stingraysmadness.com/misc/terminator/term-face.jpg)

I built the base entirely from scratch using a scrap piece of 1x4 pine and a handfull of junk from my parts box. I think it looks pretty spiffy, it certainly looks a lot better than the base that came with the kit.

(http://www.stingraysmadness.com/misc/terminator/base2.jpg)

(http://www.stingraysmadness.com/misc/terminator/base3.jpg)

As has already been established, yes, I am aware that I'm a hopeless nerd. ;) :D

-S
Title: Re: Terminator T-800
Post by: Bones on October 18, 2005, 09:21:13 am
That looks pretty cool. You must have some patience....
Title: Re: Terminator T-800
Post by: ChadTower on October 18, 2005, 09:42:08 am

Are you kidding?  He did that at work.
Title: Re: Terminator T-800
Post by: menace on October 18, 2005, 09:43:26 am
that looks awesome--although his foot should be on a human skull--more authentic to the movie ;D 

*warning* I was momentarily possessed by a nerd, all nerdy statements or anal claims should be disregarded and replaced with scantily clad women...
Title: Re: Terminator T-800
Post by: Stingray on October 18, 2005, 10:12:04 am
HA! I can get away with a lot at work, but I'm pretty sure that if I fired up the airbrush and started fuming the place up, questions would be asked. :D

Menace, rest assured that if there had been a skull in scrap box, it would have made it onto the base.

-S
Title: Re: Terminator T-800
Post by: ChadTower on October 18, 2005, 10:32:31 am

It would have been better had he been stepping on a pelvis.

Skull is cliche... when you have a loose pelvis, you know someone got REALLY effed up.
Title: Re: Terminator T-800
Post by: Stingray on October 18, 2005, 10:41:13 am
Well considering that it's going to be displayed in my office along with the other robot kits that I've built over the years, it seemed for the best that I not get too graphic.

-S
Title: Re: Terminator T-800
Post by: ChadTower on October 18, 2005, 10:42:46 am

Put a little graduation hat on him.
Title: Re: Terminator T-800
Post by: shmokes on October 18, 2005, 10:43:59 am
It's a good thing you already tricked your wife into marrying you :)
Title: Re: Terminator T-800
Post by: Stingray on October 18, 2005, 11:16:11 am
Lucky for me, I have very good taste in women, and she has appalling taste in men. ;)

-S
Title: Re: Terminator T-800
Post by: missioncontrol on October 18, 2005, 11:36:12 am
very nice work.........

now get busy on that R2 unit........
Title: Re: Terminator T-800
Post by: ChadTower on October 18, 2005, 11:42:55 am

Why do people put "what people say about me" in their sigs?

If I were to do that, not only would it be 50 pages long, but most of it would sound like it came out of a Tourette's Syndrome sufferer during an incoherent rage.
Title: Re: Terminator T-800
Post by: Stingray on October 18, 2005, 11:45:19 am


now get busy on that R2 unit........

Too late. I already got a FM X-Wing out of the box and started cleaning up some of the parts. There is an R2 in the kit though. It's about 1/4 inch tall. ;D

-S
Title: Re: Terminator T-800
Post by: missioncontrol on October 18, 2005, 11:48:41 am

Why do people put "what people say about me" in their sigs?


because it was funny at one time. and now I've been to lazy to change it.........

besides your just jealous because mine are cool titles ;D
Title: Re: Terminator T-800
Post by: Harry Potter on October 18, 2005, 11:49:02 am


now get busy on that R2 unit........

Too late. I already got a FM X-Wing out of the box and started cleaning up some of the parts. There is an R2 in the kit though. It's about 1/4 inch tall. ;D

-S
Make a full scale model and roll around the office in it. Great fun in meetings.  :laugh:
Title: Re: Terminator T-800
Post by: Stingray on October 18, 2005, 11:52:43 am


now get busy on that R2 unit........

Too late. I already got a FM X-Wing out of the box and started cleaning up some of the parts. There is an R2 in the kit though. It's about 1/4 inch tall. ;D

-S
Make a full scale model and roll around the office in it. Great fun in meetings.  :laugh:

A full scale mode is the plan on that one. However, my construction ideas proved to be more problematic than I expected. I still plan to do it, but inspiration is gonna have to strike before I can proceed. I've gone back to smaller scale stuff.

-S
Title: Re: Terminator T-800
Post by: missioncontrol on October 18, 2005, 11:53:49 am
I was refering to the full scale model.......

if your going to build, build it right....
Title: Re: Terminator T-800
Post by: ChadTower on October 18, 2005, 12:00:36 pm
besides your just jealous because mine are cool titles ;D

I am fully satisfied with being the Chief Kicker.  Short, to the point, and it officially gives me the right to put a boot up in someone's ass when I deem it appropriate.

A man can't ask for much more than that.
Title: Re: Terminator T-800
Post by: missioncontrol on October 18, 2005, 12:02:12 pm
well a cold beer would be nice.
Title: Re: Terminator T-800
Post by: Harry Potter on October 18, 2005, 12:03:42 pm
cold beer delivered by cheescake(ss) would be nicer
Title: Re: Terminator T-800
Post by: missioncontrol on October 18, 2005, 12:13:55 pm
ahhh cold beer and cheesecake(ss) stranded on a deserted island
Title: Re: Terminator T-800
Post by: Stingray on October 18, 2005, 12:30:11 pm
Where do the killer cyborgs fit in?

-S
Title: Re: Terminator T-800
Post by: ChadTower on October 18, 2005, 12:33:45 pm

Buck Rodgers.
Title: Re: Terminator T-800
Post by: missioncontrol on October 18, 2005, 12:48:34 pm
Where do the killer cyborgs fit in?

-S

well they can have their own island...

just leave me the cheesecake and beer....

I also don't want any Sarah Connor cheesecake on my island either....
Title: Re: Terminator T-800
Post by: Stingray on October 18, 2005, 12:53:18 pm


I also don't want any Sarah Connor cheesecake on my island either....

You're just scared of a girl who can whup yer hiney.

...I know I am!

-S
Title: Re: Terminator T-800
Post by: missioncontrol on October 18, 2005, 12:57:59 pm
I just did a gis on sarah connor and I've changed my position.

Title: Re: Terminator T-800
Post by: ChadTower on October 18, 2005, 12:59:14 pm

Did he just say he jizzed on Sarah Connor?
Title: Re: Terminator T-800
Post by: missioncontrol on October 18, 2005, 01:00:42 pm
The new and improved Sarah Connor

(http://kniazeu.by.ru/images/music/sarah_connor_004.jpg)