Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Marky_1979 on October 01, 2005, 11:08:50 am

Title: Hagstrom ke72-t mouse buttons
Post by: Marky_1979 on October 01, 2005, 11:08:50 am

how do i wire up my mouse buttons ? i have a part on the encoder with 3 black wires what do i do? :(

Title: Re: Hagstrom ke72-t mouse buttons
Post by: TalkingOctopus on October 01, 2005, 12:30:32 pm

From the manual...


The KE72 Mouse Button Inputs:

Use this port to connect switches for simulating mouse button information.
These inputs are activated by shorting them to the common Ground signal
provided. All input signals must be compatible with 5V logic levels.

Connector on KE72-T               FOR MODEL KE72-T ONLY!

__________
                    |
                    |----  Right Mouse Button Input
                    |
                    |----  Middle Mouse Button Input
                    |
                    |----  Left Mouse Button Input
                    |
                    |----  Logic Ground
__________|

Title: Re: Hagstrom ke72-t mouse buttons
Post by: Marky_1979 on October 01, 2005, 12:42:12 pm

thank you how would i connect these to my 2 sanwa buttons?

Title: Re: Hagstrom ke72-t mouse buttons
Post by: TalkingOctopus on October 01, 2005, 12:54:52 pm

Quote from: Marky_1979 on October 01, 2005, 12:42:12 pm

thank you how would i connect these to my 2 sanwa buttons?

The same way you'd connect anything else.  Connect one of the pins on the microswitch to the ground and connect the other one to the mouse button.