Build Your Own Arcade Controls Forum

Main => Project Announcements => Topic started by: paigeoliver on September 18, 2005, 08:02:17 pm

Title: Carnival.
Post by: paigeoliver on September 18, 2005, 08:02:17 pm

I just traded a Neo Geo cartridge for this one today.

It is 100 percent complete.

I have a real hankering to play some 6 player X-Men, so I figured I would install a six player control panel. But to maintain the originality of the cabinet I will install a 13" PC monitor vertically!!

Ok, just kidding. It will almost certainly remain Carnival.

Monitor SEEMS to work, power supply is putting out clean power, but I am getting wildly different readings at different spots on the board.

I need to access a manual though, to make sure I have the sound board plugged in correctly, and to see which molex connectors coming from the front go to which ones off the board.

Title: Re: Carnival.
Post by: nostrebor on September 18, 2005, 09:44:42 pm

6 player X-Men ROCKS!!

Looks like a nice cabinet. In what order are you going to build your 4 projects?

Title: Re: Carnival.
Post by: paigeoliver on September 19, 2005, 12:08:22 am

Carnival almost works, so it is one of those deals that might be fixed at any time, or might be dead a year from now.

I'll likely be concentrating on the Super Sprint though, with the Frontline being secondary. I haven't even picked up the Zookeeper yet, so it is last.

Title: Re: Carnival.
Post by: zorg on September 19, 2005, 08:23:30 am

can you scan the bezel ?

Title: Re: Carnival.
Post by: Crazy Cooter on September 20, 2005, 12:50:26 pm

Quote from: paigeoliver on September 18, 2005, 08:02:17 pm

I need to access a manual though...

http://www.basementarcade.com/arcade/library/manuals/c/Data.html