Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: eggedd2k on September 11, 2005, 05:06:55 pm
-
getting the wood cut for my project this coming friday. just wondered if anyone else has made a defender cab from scratch? got any pics?
-
Lot's of us. Do some searching and walk through the examples page. Many of use used Brien King's schematic (http://www.arcaderestoration.com/index.asp?OPT=3&DATA=448&CBT=66) for sizing.
Also, check out Kevin Umbach's page (http://members.shaw.ca/kevinu/arcade/index.htm). I used his guide to get started.
Good luck!
-pmc
-
for defender inspired cabs check out mine in projects or the ulitmate arcade by pocketz.
-
Here's mine.
(http://www.geocities.com/weedzie1/mame/done.jpg)
-
I did one with some changes, but I didn't use it as an actual Defender.
-
It's nice to see that after 7 years, people are still referring to my site as well as Brien's Defender dimensions. :) Good luck with your project.
Kevin
http://members.shaw.ca/kevinu/arcade/index.htm
Lot's of us. Do some searching and walk through the examples page. Many of use used Brien King's schematic (http://www.arcaderestoration.com/index.asp?OPT=3&DATA=448&CBT=66) for sizing.
Also, check out Kevin Umbach's page (http://members.shaw.ca/kevinu/arcade/index.htm). I used his guide to get started.
Good luck!
-pmc
-
It's nice to see that after 7 years, people are still referring to my site as well as Brien's Defender dimensions.