Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: fiscap on September 08, 2005, 05:44:15 pm

Title: Another 49-way question
Post by: fiscap on September 08, 2005, 05:44:15 pm

Does anyone know how much depth you need in your control panel in order to install a 49-way joystick? I checked the specifications on the Happ site and there are no dimensions provided.

Title: Re: Another 49-way question
Post by: RandyT on September 08, 2005, 09:32:45 pm

You're going to want at least 3.25" below the bottom surface of the panel.  If you intend to ever replace the shaft with one of our ball-tops, go 3.5"

If you want to use floyd's rotary adapter, you'll need quite a bit more.

RandyT