Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: BioFreak on September 08, 2005, 01:52:59 pm

Title: New Hampshire CNC access?
Post by: BioFreak on September 08, 2005, 01:52:59 pm

Not sure if it's even worth posting this, but I'll take a shot.
Is there anyone in the New Hampshire area that
1. Has access to a cnc machine, or something comparable
2. Would want to help cutting out some 1/2" mdf for the cabinet I'm building.
(Sides and Control Deck)

I know it's a long shot, but you never know unless you ask, right?
Feel free to email me if you don't want to post a reply that you'd like to help, on the board.
Thanks all.
mamebuild@yahoo.com

Title: Re: New Hampshire CNC access?
Post by: crashwg on September 08, 2005, 08:18:59 pm

New Hampshire... Where at?  I'm in Concord.  Unfortunatly the only CNC place I deal with at my job is Hydrocam which does abrasive water cutting which if you can't tell by the name would not be good with MDF with the water and all.  :P

I hope you find what you're looking for.  If you don't there's always CNCZone.com, you can build your own!  I plan to do that someday when I have a garage or at the very least a basement!  :P

Title: Re: New Hampshire CNC access?
Post by: BioFreak on September 09, 2005, 03:39:26 pm

Hey crashwg I'm in Merrimack.

I'd love to build a cnc machine but as it is I'm pushing the budget just to build the cabinet.
Not sure I could sneak a machine in under the wife's radar, hahahaha... As it is if I didn't have the PC components already available (monitor and cpu) this project wouldn't have gone this far.

Title: Re: New Hampshire CNC access?
Post by: JCL on September 09, 2005, 07:15:02 pm

Quote from: BioFreak on September 09, 2005, 03:39:26 pm

Hey crashwg I'm in Merrimack.

I'd love to build a cnc machine but as it is I'm pushing the budget just to build the cabinet.
Not sure I could sneak a machine in under the wife's radar, hahahaha... As it is if I didn't have the PC components already available (monitor and cpu) this project wouldn't have gone this far.

It's easy to sneak computer in, it's much harder to hide a 6 freaking foot tall box!

"That thing? It's always been there. I've had it since before we were married!"

Title: Re: New Hamp---auto-censored---e CNC access?
Post by: JoyMonkey on September 09, 2005, 08:04:28 pm

I'm going to see if I can get personal access to my CNC machine at work. I'm pretty sure that my boss would be okay with it, but he might ask for a small fee (you'd think he's trying to run a business or something  :P)

While I'm at it, would anyone else in the New England area like some parts cut? (I'm in Salem, MA)