Build Your Own Arcade Controls Forum

Main => Artwork => Topic started by: Rook3 on August 30, 2005, 08:22:24 pm

Title: Pinball: Bally/Midway Cabinet art done!
Post by: Rook3 on August 30, 2005, 08:22:24 pm

Well, I finally finished my first vector image set! Yay!

After the fact, I spotted a couple of "oops" sections, little parts where things didn't quite line up, but over all I'm pleased with the results.

This art is a slightly reworked version of the classic (generic) Bally/Midway pinball art from the mid 1980s.

Title: Re: Pinball: Bally/Midway Cabinet art done!
Post by: ChadTower on August 31, 2005, 09:28:48 am

Nice.  Very nice.

Title: Re: Pinball: Bally/Midway Cabinet art done!
Post by: Rook3 on August 31, 2005, 05:47:58 pm

Thanks!  I almost made a major layer error at the end. I noticed I had the red 'bally' layer behind the pinball "speed" lines. Saved that one at the last moment before flattening the image. :)

It was really a learning process, and I'd NEVER have been able to do it without Frostillicus' tutorial. It was very helpful in the early stages.

Russ

Title: Re: Pinball: Bally/Midway Cabinet art done!
Post by: allroy1975 on September 01, 2005, 12:09:54 am

YEAH BABY!  That's what I'm talking about!  Looks TOTALLY Sweet!

It's the pinball revolution!  w00t!

I'm almost done with my Baby Pac-Man CPO.  That must be the most worn out part on a baby pac.  The Side art will fly.  Hopefully that will qualify on the art site as Pinball.  ;)

GREAT Work!

We gotta keep it up with this pinball stuff.  :D

Allroy