Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Humanoid on August 19, 2005, 01:32:44 am

Title: Who wants to fabricate a Metal Control Panel
Post by: Humanoid on August 19, 2005, 01:32:44 am

I just finished my custom (as in odd sized) cocktail cabinet.  I currently have wood control panels on it, which I do not care for.  I was supposed to have a guy Custom fabricate 3 panels for me (2 sides and a front)  and I went so far as to make an autocad diagram of the panels for use at his shop.  The panels are not going to get made now. Can any one help me out at a reasonable cost or possible trade?
Thanks!

Title: Re: Who wants to fabricate a Metal Control Panel
Post by: whammoed on August 19, 2005, 09:35:16 am

Do you need the standard "pac man" cocktail shaped panels?  If so what lengths do you need?

Title: Re: Who wants to fabricate a Metal Control Panel
Post by: rchadd on August 19, 2005, 09:43:22 am

arcadeshop.com sell them (least the end ones)

Title: Re: Who wants to fabricate a Metal Control Panel
Post by: Humanoid on August 19, 2005, 02:59:41 pm

They are actually the standard Ms. Pacman shaped panels.  The Dimensions on the front panel are obviously a little different.  The legnths are 12 inches on the ends and 22 inches across the front.

Title: Re: Who wants to fabricate a Metal Control Panel
Post by: juggle50 on August 20, 2005, 02:01:06 am

arcade depot is making me a custom pair for me.  The guys name is Scott and he seems pretty cool.