Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: hitandrun on August 16, 2005, 09:29:17 pm

Title: Coin Co Reject Button Help...
Post by: hitandrun on August 16, 2005, 09:29:17 pm

I am trying to find the easiest way to get the 25c insert for my coin reject button to be lined up with the other.

Title: Re: Coin Co Reject Button Help...
Post by: darktemp on August 16, 2005, 10:15:43 pm

It's not difficult to remove the assembly.  Just remove the 4 nuts on the inside corners and the whole thing comes off.  From there It's pretty simple to figure out.

Title: Re: Coin Co Reject Button Help...
Post by: Ken Layton on August 17, 2005, 01:12:58 am

Actually just take the coin chute out of it's holder, take those two nylock nuts off (1/4" nutdriver), and slide the coin trough backwards. Watch out for the reject button spring so it doesn't fly out. The button just slides out now.

Title: Re: Coin Co Reject Button Help...
Post by: hitandrun on August 17, 2005, 06:45:03 am

Thanks for the help!  I will give this a try this evening when I get home.