Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: toolaa on August 14, 2005, 09:06:42 am

Title: Proper A-Pac Setup Help
Post by: toolaa on August 14, 2005, 09:06:42 am

I am setting up the A-Pac with three axis controls.  When I go to calibrate the controls, P1x and P1x do show movement in the calibration screen.  However P2x does not.  I would like to confirm the wiring of the pot.  Do I need a second .15uF cap on the other side of the board?  (See Pic Below)

Title: Re: Proper A-Pac Setup Help
Post by: grueinthebox on August 14, 2005, 10:17:20 am

Yes, you need the 2nd cap.

Title: Re: Proper A-Pac Setup Help
Post by: toolaa on August 14, 2005, 12:29:59 pm

Thanks...