Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: electricd on August 05, 2005, 10:08:21 pm

Title: Need 5V from either IPAC4 or OptiPac
Post by: electricd on August 05, 2005, 10:08:21 pm

Ok, I know I could ask this over at Andy's forums, but you guys are always quick and good to me, so here goes.  I need to get a 5V and GND lead from either an IPAC4 or OptiPac to use to power a small bulb used to light my trackball.  I know that the IPAC has that output (or at least used to) as I used a jumper from it to power my old school optipac.  Can anyone tell me exactly on the board where to get this from?  Thanks in advance!!